Pendekatan Geometris dan Aljabar Kompleks dalam Analisis Kinematik Mekanisme Enam Batang Tipe Stephenson II
DOI:
https://doi.org/10.25077/inomet.3.2.7-13.2025Keywords:
Kinematics , Kinematic invers , Stephenson mechanismAbstract
This paper presents a kinematic analysis of the Stephenson II six-bar mechanism. The mechanism consists of six links with a single degree of freedom, including one fixed link, three binary links, and two ternary links. Several approaches can be employed to obtain the kinematic solution of this mechanism. One commonly used approach is the vector loop method, which leads to a set of nonlinear equations that must be solved numerically and does not yield closed-form solutions. Another approach is the graphical method; however, its applicability is limited due to its reliance on geometric constructions of the mechanism. In this study, the kinematic solution is obtained using a geometric method based on inverse kinematics, with the application of complex algebra in deriving the velocity and acceleration equations. The resulting kinematic equations for displacement, velocity, and acceleration are geometrically validated.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jurnal Inovasi Rekayasa Mekanikal dan Termal

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
