Pengaruh Penambahan Fin Pada Blade Dengan Variasi Sudut Kemiringan Terhadap Kinerja Turbin Savonius

Authors

  • gusriwandi gusriwandi Departemen Teknik Mesin Universitas Andalas

DOI:

https://doi.org/10.25077/inomet.3.1.53-62.2025

Abstract

Renewable energy has become a primary focus in addressing climate change and reducing dependence on fossil fuels. Wind turbines, particularly the Savonius turbine type, have significant potential for harnessing low-speed wind energy, although their efficiency still requires improvement. This study aims to enhance the efficiency of Savonius turbines by adding a fin to the concave blade and varying its inclination angle (0°, 15°, 30°, 45°, and 60°). The research methods included simulations using ANSYS software and experimental testing in a wind tunnel with wind speeds ranging from 3 to 5 m/s. The performance parameters observed were the power coefficient (Cp) and tip speed ratio (TSR). The results indicate that a fin inclination angle of 15° produced optimal performance, with Cp 0.2916 and TSR 0.3928 in CFD simulations, and Cp 0.2379 and TSR 0.7434 in experimental tests at a wind speed of approximately 4.1 m/s. The addition of a fin at this angle effectively improves the efficiency of Savonius turbine.

Downloads

Published

2025-06-30

Issue

Section

Articles