Efek Penambahan Tepung Sagu terhadap Peningkatan Ketahanan Retak Polyester Tak Jenuh

Authors

  • Nusyirwan Departemen Teknik Mesin Universitas Andalas
  • Rispandi Departemen Teknik Mesin Universitas Andalas
  • Eka Satria Departemen Teknik Mesin Universitas Andalas

Keywords:

composit-polymer, sago-starch-flour, composite-matrix, intensity-factor

Abstract

Polymer materials have been widely developed as alternative materials to replace metal materials due to various advantages such as having low density and an easy manufacturing process. Still, polymers have many disadvantages, including not having high mechanical strength, easy to crack when hit by impact. One of the materials studied is an unsaturated polyester polymer widely used for composite matrices in vehicle structural components, aircraft and ship bodies, and vehicle components. One of the studied fibers is sago starch flour particle fiber. The study of cracks is essential because it causes the material to no longer be able to support the load according to the previous plan and causes failure to occur more quickly. One way to overcome material failure due to cracks in the composite material is to prevent crack propagation by adding reinforcing material. In this study, a composite material was made using sago starch flour fiber to increase the crack resistance of the polyester composite matrix. From the results of crack testing, there is a tendency to increase the percentage of sago starch flours by 5%, 10%, 15%, and 20%. The value expected to be obtained for determining the crack resistance of the material is the value of the stress intensity factor (K1C). The most significant K1 value was obtained at a 15% sago starch flour percentage variable of 1.346 MPa.m0.5. This price could increase the value of the pure polyester stress intensity factor K1C by 0.567 MPa.m0.5, indicating an increase of 237%.

Downloads

Published

2024-12-30

Issue

Section

Articles