Desain Komponen Mekanik Mekanisme Paralel 3-URU Rotasi Murni Dengan Pertimbangan Capaian Workingspace dan Inersia Komponen Bergerak
DOI:
https://doi.org/10.25077/inomet.2.2.14-20.2024Keywords:
Desain Kinematik , Mekanisme Parallel , Mekanisme Rotasi MurniAbstract
This paper discusses the design of the mechanical components of the 3-URU pure rotation parallel mechanism. The design is focused on obtaining the geometry shape of all mechanical components to avoid interference between mechanical components in the workspace and increase the payload of this mechanism relative to the mass of its moving components. This needs to be done because in general, parallel mechanisms have the complexity of the kinematic chain structure so that it is necessary to select the geometry of the joints and links. In addition, the weight of the moving components of the mechanism is also a consideration to reduce the inertia of the moving components. The design of all components of the mechanism is based on CAD program and then using the CAD design, the workspace achievement is evaluated. The evaluation showed that the mechanism could achieve a maximum inclination angle of 50 degrees in accordance with the inclination angle required in the kinematic design. Furthermore, the static evaluation showed that the mechanism is able to withstand a load equal to twice the weight of the moving components.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Jurnal Inovasi Rekayasa Mekanikal dan Termal

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
